17
18
12. Polishing
Polish by using brush, fabric buff, and polishing
material to finish.
11. Finishing
Remove any scars with paper cone and silicon
point to make the surface smooth.
13. Complete
9. Final Light Curing
After final layering, light cure for about 180 sec.
as a final light curing.
8. Translucent Application and Light
Curing
In cases where Translucent is required, apply
Translucent and light cure for about 60 sec.
For the intermediate color expression between
Translucent and Enamel, apply Translucent
Enamel. For discoloring expressions, apply Effect
partially.
6. Dentine Application and Light Curing
Apply Dentine to form the required dentine core
shape and light cure for about 60 sec.
(If partial characterization of color adjustment is
necessary, apply desired color of Stain with
round brush and light cure for about 60 sec. )
Forming Examples
Facing Crown
[ Basic Build-Up Layering for Crown Bridge ］
5. Cervical (Opaque Dentine) Application
and Light Curing
Apply Cervical or Opaque Dentine starting from
the neck to the incisal area, applying
progressively thinner, taking subsequent color
gradation into consideration. Light cure for about
60 sec.
Form and light cure Body Resin
10. Corrections to Shape
Correct the shape using a carborundum or
diamond point.
* Additional Layering
In the case of additional layering after
corrections to shape, apply Repair Liquid thinly
and apply needed body resin. Light cure for 60
sec., the same steps as 5-10.
Figure adjustment and polish
Final light cure
7. Enamel Application and Light Curing
Apply Enamel to form the required crown shape
and light cure for about 60 sec.
*Conventional curing time is indicated in the following steps.
In case, the LED CURE Master is used, please confirm "Light Curing Schedule" on pade 9.
