6
Enter a standby status
1
、
Press key
POWER,
the unit will enter a standby status and the indicator light will turn
red at the same time.
2
、
Press key
POWER
again, the unit will exit the standby status and the indicator light will
turn orange( no signal inputting ) or green(signal inputting).
Select the TV channel you want
You can use
Channel Select
on the remote control to select TV channels
directly.
The unit can store
199
channels
（
1 to 199
）
, and you can press the keys on
the remote control or on the panel to make a selection.
1
、
Press the relevant key on the remote control if you want
to choose any channel from 0 to 9.
（
for example: if you
want to choose channel 8, just press the key number 8.
）
2
、
If you want to choose a channel bigger than 9, please
press key
-/--
at first, and then press the number you want.
（
for example: select channel 45
）
（
1
）
、
Press key
-/--
；
（
2
）
、
Press key number 4
；
（
3
）
、
Press key number 5
。
note
·
Use the second way to select a channel, you should finish all steps in 4
seconds.
·
Use key -/-- to switch between stations 0~9 and 10~199.
3.Auto search TV proglams
(surely that you have
Used key
INPUT
to set the video input mode to
TV
model)
You can press key
menu
on the remote control and use key
CH+
or
CH-
select
Auto Scan
, then press key
VOL+
begin to search the TV proglams.
When you want to stop the search ,you can press key
VOL-.
Use key
CH
（
）
/
（
）
on the remote control the panel to select the channel you want.
Press key
CH
（
）
,
and the channel will be changed as follows:
2
→
3
→
…
→
198
→
199
→
1
→
2
→
3…
Press key
CH
（
）
,
and the channel will be changed as follows:
3
→
2
→
1
→
199
→
198
→
…
→
4
→
3
