![background image](http://html.mh-extra.com/html/yamakawa/dvd-335/dvd-335_operation-manual_905174004.webp)
Point for Attention
To reduce the risk of fire and electrical shock, do not remove the cover of this unit. Please
refer all servicing difficulties to qualified technicians . This lightning flash arrow symbol
in a triangle, is intended to alert users to the presence of non-insulated high voltage
within the product`s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to person. The exclamation point symbol in a triangle is intended to alert
users to the presence of important operating and maintenance instructions in the literature
accomnying the unit.
LASER PRODUCT - This marking indicates the presence of laser beams used in this
unit, and CLASS 1 refers to laser beams of the weaker class. There is no danger of
hazardous radiation outside this unit.
Read through this instruction manual before installation and use.
To disconnect the power cord, hold the plug instead of pulling on the cord.
Switch off the main power when the unit is not in use. (Disconnect the power plug
from the power outlet when you do not intend to use the unit for a prolonged period
of time.) Before moving the unit,remove the disc from the unit`s tray first.
Do not open the cover or touch any of the components inside the unit.
Do not operate or install the unit under direct sunlight or near objects that radiate
heat. This may lead to overheating of the unit.
Do not operate or install the unit in moist or humid conditions. This may affect the
pick-up of the unit.
IInstall the unit on a flat surface with good air circulation. Please ensure the
ventilation holes are not covered otherwise the unit will overheat and malfunction.
Wipe the panel and case with soft dry cloth only. Do not apply any kind of thinner,
alcohol or sprays when cleaning the unit.
REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL
2
Attention: To reduce the risk of fire and electric shock, do not expose this unit to rain
or moisture.
IMPORTANT NOTICE:
CAUTION:
CLASS1:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISQUE D ELECTROCUTION
NE PAS OUVRIR
ATTENTION
CLASS 1 LASER
PRODUCT TO IEC 825
LASER KLASSE 1
NACH IEC 825
WARNING:
SHOCK HAZARD-DO NOT OPEN
AVIS:
RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR