06
Video Output
If your display device supports S-Video terminal,
you can also connect your display device to DVD
player’s S-Video Output connector on the rear panel.
Connect the DVD player’s video output (RCA connec-
tor or S-Video) on the rear panel to the TV’s video input
(or other devices) using AV, S-Video or Component.
S-Video Output
Notes:
1.Refer to the instructions supplied with the component to
be connected.
2.Do not connect this player to a video deck. If you do,
noise may appear in the picture.
Video Connection
V C R
T V
X
Connect
directly
CD / DVD
PLAYER
Audio Connection
Stereo Configuration
Connect your TV stereo audio inputs (L for left channel
and R for right channel) to the DVD player’s stereo au-
dio output L and R respectively.
Analog 2 / 5.1 Channel Output
For your convenience and cost concern, DVD-Player
supports Dolby 2/5.1 Channel audio output directly.
However, you still need to connect the 2/5.1 Channel
audio output to your audio amplifier relatively as
following.
Note:
When you connect the DVD player to another device, be sure to
turn off the power and unplug all of the equipment from the wall
outlet before making any connections. The output sound of the
DVD player has a wide dynamic range. Be sure to adjust the
receiver’s volume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume sound. Turn
off the receiver before you connect or disconnect the DVD player’s
power cord. If you leave the receiver power on, the speakers
may be damaged.
Getting Started
COMPONENT
COMPONENT
C
B/
P
B
C
R/
P
R
Y
GREEN
BLUE
RED
YELLOW
White
Red
White Red
You can connect the DVD Receiver to a device
having COMPONENT video input connetors
by three terminal Video cables.
Rear of TV set
S-video cord
(not supplied)
S-video input
terminal (S1, S2)
To S-video terminal
Summary of Contents for DVD-238
Page 1: ......