Yamaha Zuma YW50X, Owner'S Manual

Page: 32 / 84

5-1
1
2
3
4
5
6
7
8
9
OPERATION AND IMPORTANT RIDING POINTS
EAU15980
EWA10870
w
● ● ● ● ●
Become thoroughly familiar with
all operating controls and their
functions before riding. Consult
a Yamaha dealer regarding any
control or function that you do
not thoroughly understand.
● ● ● ● ●
Never start the engine or oper-
ate it in a closed area for any
length of time. Exhaust fumes
are poisonous, and inhaling
them can cause loss of con-
sciousness and death within a
short time. Always make sure
that there is adequate ventila-
tion.
● ● ● ● ●
For safety, always start the en-
gine with the centerstand down.
EAU16582
Starting and warming up a
cold engine
ECA10250
c C
See page 5-4 for engine break-in in-
structions prior to operating the ve-
hicle for the first time.
ZAUM00**
ENGINE STOP
START
1
1. Engine stop switch “
#
/
$
”
1. Set the engine stop switch to “
#
”.
2. Turn the key to “*”, and when the
2-stroke engine oil level warning
light comes on, turn the key to
“ON”.
Starting and warming up a cold engine<IXE>
ECA11580
c C
If the 2-stroke engine oil level warn-
ing light does not come on, have a
Yamaha dealer check the electrical
circuit.
3. Close the throttle completely.
ZAUM00**
1
1. Kickstarter lever
4. Start the engine by pushing the
start switch or by pushing the
kickstarter lever down, while apply-
ing the front or rear brake.
NOTE:
If the engine fails to start by pushing
the start switch, release the switch, wait
a few seconds, and then try again. Each
EAU15942
OPERATION AND IMPORTANT RIDING POINTS
5PJ-F8199-14_ch5.pmd 2007/04/20, 10:51 1