6D03F1X
54
Disassembling the reverse gear
1.
Remove the needle bearing from the
reverse gear using a chisel.
Assembling the lower case
1.
Install the needle bearing into the
retainer to the specified depth.
2.
Install the original shim(s) and retainer
into the lower case.
CAUTION:
Add or remove shim(s), if necessary, if
replacing the forward gear or lower case.
3.
Install the needle bearing outer case into
the lower case.
NOTE:
Apply gear oil to the needle bearing outer
case before installation.
4.
Install the needle bearing into the needle
bearing outer case.
NOTE:
Apply gear oil or grease to the needle bear-
ing before installation.
Needle bearing attachment
1
:
90890-06654
Driver rod L3
2
: 90890-06652
Depth
a
:
–0.25–0.25 mm (–0.010–0.010 in)
Ball bearing attachment
3
:
90890-06657
Driver rod LL
4
: 90890-06605
Bearing outer race attachment
5
:
90890-06628
Bearing outer race puller
assembly
6
:
90890-06523
Drive shaft and lower case (counter rotation model)
