Yamaha YZFR3F, Owner'S Manual

Page: 20 / 106

INSTRUMENT AND CONTROL FUNCTIONS
4-3
4
is correct, imme d iately turn the en-
g ine off an d have a Yamaha d ealer
check the vehicle.
TIP
If the warning light does not go off after
starting the engine, check the engine
oil level and add oil if necessary. (See
page 7-10.)
If the warning light remains on after
adding engine oil, have a Yamaha
dealer check the vehicle.
EAU62790
En g ine trou b le warnin g li g ht “ ”
This warning light comes on or flashes
if a problem is detected in the electrical
circuit monitoring the engine. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system. (See page 4-10
for an explanation of the self-diagnosis
device.)
The electrical circuit of the warning
light can be checked by turning the key
to “
”. The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to “
”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
The engine trouble warning light will
come on while the start switch is
pushed, but this does not indicate a
malfunction.
EAU62470
Shift timin g in d icator li g ht
This indicator light can be set to come
on and go off at the desired engine
speeds and is used to inform the rider
when it is time to shift to the next high-
er gear. (See page 4-8 for a more de-
tailed explanation of this indicator light
and on how to set it.)
The electrical circuit of the indicator
light can be checked by turning the key
to “
”. The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to “
”,
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
U2MS70E0.book Page 3 Thursday, December 18, 2014 1:46 PM