Yamaha YZF-R7 2022 Owner'S Manual Download

Page: 86 / 100

Perio

ic maintenance an

justment

7-35

EAU86350

Trou

leshootin

chart

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel.

The engine does not start.
Check the battery.

Try starting the engine.

4. Compression

There is compression.

There is no compression.

The engine does not start.
Have a Yamaha dealer check the vehicle.

Have a Yamaha dealer check the vehicle.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug(s).

Have a Yamaha dealer check the vehicle.

The engine does not start.
Check the compression.

Operate the electric starter.

2. Battery

The engine turns over
quickly.

The engine turns over
slowly.

The battery is good.

Dry

Wet

Try starting the engine.

Check the battery lead connections,
and charge the battery if necessary.

The engine does not start.
Check the ignition.

UBATEZE0.book Page 35 Monday, December 14, 2020 1:08 PM

Summary of Contents for YZF-R7 2022





































































































Search results

Summary of Contents for YZF-R7 2022

Reviews:

Related manuals for YZF-R7 2022

Brands by name

Popular brands

Yamaha YZF-R7 2022, Owner'S Manual

Search results

Summary of Contents for YZF-R7 2022

Reviews:

Related manuals for YZF-R7 2022

Brands by name

Popular brands