SPEC
14
Pass the fuel tank breather hose and fuel tank
drain hose over the fuel hose and fuel return hose.
One rotation is possible for a twist of fuel tank
breather hose and fuel tank drain hose before an
engine clamp.
To the rear tail / brake light switch lead.
To the neutral switch
Insert the wire harness wrapping clamp to the
frame hole.
Pass the battery negative lead over the wire har-
ness.
To the engine. Upper or lower position relation
against the heat protector is no object.
There should be no interference between the wire
harness and the tip of the rear frame attaching
bolts.
To the coolant reservoir tank
To the intake air temperature sensor (air filter
case)
To the oil level switch, sidestand switch and A.C.
magneto
Install the wire harness wrapping clamp to the stay
of the throttle body.
Pass the wire harness over the throttle air vent
hose.
Pass the wire harness between frame and coolant
hose.
Pass it through the frame hole.
Route the main switch lead under the left handle-
bar switch lead and radiator fan motor lead (right).
CABLE ROUTING
