PERIODIC MAINTENANCE AND MINOR REPAIR
6-39
6
To store the battery
1. If the motorcycle will not be used
for more than one month, remove
the battery, fully charge it, and
then place it in a cool, dry place.
2. If the battery will be stored for
more than two months, check it at
least once a month and fully
charge it if necessary.
3. Fully charge the battery before in-
stallation.
4. After installation, make sure that
the battery leads are properly con-
nected to the battery terminals.
EC000102
CAUTION:
@
●
Always keep the battery
charged. Storing a discharged
battery can cause permanent
battery damage.
●
To charge a sealed-type (MF)
battery, a special (constant-
voltage) battery charger is re-
quired. Using a conventional
battery charger will damage the
battery. If you do not have ac-
cess to a sealed-type (MF) bat-
tery charger, have a Yamaha
dealer charge your battery.
@
EAU04375
Replacing the fuses
The main fuse and the fuse box, which
contains the fuses for the individual cir-
cuits, are located under the rider seat.
(See page 3-13 for rider seat removal
and installation procedures.)
If a fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
1. Headlight fuse
2. Radiator fan fuse
3. Ignition fuse
4. Signaling system fuse
5. Backup fuse (odometer and clock)
6. Spare fuse (
×
3)
E_5MT.book Page 39 Tuesday, August 28, 2001 2:05 PM
Summary of Contents for YZF-R6P
Page 2: ...EAU03438 ...
Page 110: ...SPECIFICATIONS 8 Specifications 8 1 E_5MT book Page 1 Tuesday August 28 2001 2 05 PM ...
Page 123: ...CONSUMER INFORMATION 9 8 9 E_5MT book Page 8 Tuesday August 28 2001 2 05 PM ...
Page 125: ...CONSUMER INFORMATION 9 10 9 E_5MT book Page 10 Tuesday August 28 2001 2 05 PM ...