Yamaha YZF-R6P, Owner'S Manual

Page: 28 / 128

INSTRUMENT AND CONTROL FUNCTIONS
3-7
3
EAU03729
Self-diagnosis device
This model is equipped with a self-di-
agnosis device for the following electri-
cal circuits:
● throttle position sensor
●
speed sensor
If any of those circuits are defective,
the tachometer will repeatedly display
the following error code:
CB-11E
Use the table below to identify the
faulty electrical circuit.
CB-28E
If the tachometer displays such an er-
ror code, note the circuit-specific num-
ber of r/min, and then have a Yamaha
dealer check the motorcycle.
EC000004
CAUTION:
_
When the tachometer displays an
error code, the motorcycle should
be checked as soon as possible in
order to avoid engine damage.
_
EAU00118
Handlebar switches
EAU03888
Dimmer switch “ / ”
Set this switch to “ ” for the high
beam and to “ ” for the low beam.
0 r/min for
3 seconds
Circuit-specific
number of r/min
for 2.5 seconds
(See the table
below.) Current
engine
speed for
3 seconds
Specific r/min Faulty electrical circuit
3,000 r/min Throttle position sensor
4,000 r/min Speed sensor
1. Dimmer switch “ / ”
2. Turn signal switch “ / ”
3. Horn switch “ ”
E_5MT.book Page 7 Tuesday, August 28, 2001 2:05 PM