Instrument an
d
control functions
4-20
4
EAU68140
A
d
justin
g
the shock a
b
sor
b
er
assem
b
ly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring.
NOTICE
ECA10102
To avoi
d
d
ama
g
in
g
the mechanism,
d
o not attempt to turn
b
eyon
d
the
maximum or minimum settin
g
s.
Adjust the spring preload as follows.
1. Remove the drive chain guard by
removing the bolts and collars.
2. To increase the spring preload
and thereby harden the suspen-
sion, turn the adjusting ring in di-
rection (a). To decrease the spring
preload and thereby soften the
suspension, turn the adjusting ring
in direction (b).
Align the appropriate notch in
the adjusting ring with the po-
sition indicator on the shock
absorber.
Use the special wrench and
the extension bar included in
the owner’s tool kit to make
the adjustment.
3. Install the drive chain guard by in-
stalling the collars and bolts, and
then tighten the bolts to the spec-
ified torque.
1. Drive chain guard
2. Bolt and collar
2
1
1. Extension bar
2. Special wrench
3. Spring preload adjusting ring
4. Position indicator
7 6 5 4
3 2 1
4
(b)
(a)
3
2
1
Sprin
g
preloa
d
settin
g
:
Minimum (soft):
1
Standard:
3
Maximum (hard):
7
Ti
g
htenin
g
torque:
Drive chain guard bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
UB0220E0.book Page 20 Tuesday, March 3, 2015 9:20 AM
