PERIODIC MAINTENANCE AND ADJUSTMENT
7
-12
7
TIP
The coolant should be between the
minimum and maximum level marks.
3. If the coolant is at or below the
minimum level mark, remove the
reservoir cap.
4. Add coolant to the maximum level
mark, and then install the reser-
voir cap.
WARNING! Remove
only the coolant reservoir cap.
Never attempt to remove the ra-
diator cap when the engine is
hot.
[EWA15161]
NOTICE:
If coolant is
not available, use distilled wa-
ter or soft tap water instead. Do
not use hard water or salt water
since it is harmful to the en-
gine. If water has been used in-
stead of coolant, replace it with
coolant as soon as possible,
otherwise the cooling system
will not be protected against
frost and corrosion. If water
has been added to the coolant,
have a Yamaha dealer check
the antifreeze content of the
coolant as soon as possible,
otherwise the effectiveness of
the coolant will be reduced.
[ECA10472]
EAU33031
Changing the coolant
The coolant must be changed at the
intervals specified in the periodic
maintenance and lubrication chart.
Have a Yamaha dealer change the
coolant.
WARNING! Never attempt
to remove the radiator cap when
the engine is hot.
[EWA10381]
1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark
ZAUE0105
3
1. Coolant reservoir cap
1
Coolant reservoir capacity (up to the
maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
54CF8199E1.book Page 12 Thursday, April 1, 2010 1:24 PM
