INSTRUMENT AND CONTROL FUNCTIONS
4
-4
4
●
two tripmeters (which show the
distance traveled since they were
last set to zero)
●
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
●
a fuel meter
TIP
Be sure to turn the key to “ON” before
using the “RESET/SELECT” button.
Odometer and tripmeter modes
A brief push (less than one second) on
the “RESET/SELECT” button switch-
es the display between the odometer
mode “ODO” and the tripmeter modes
“TRIP 1” and “TRIP 2” in the following
order:
ODO <RARR> TRIP 1 <RARR> TRIP
2 <RARR> ODO
When approximately 1.9 L (0.50 US
gal, 0.42 Imp.gal) of fuel remains in
the fuel tank, the odometer display will
automatically change to the fuel re-
serve tripmeter mode “F-TRIP” and
start counting the distance traveled
from that point, and the last segment
of the fuel meter will start flashing. The
fuel reserve tripmeter will reset itself
automatically and the display will re-
turn to the prior mode after refueling
and traveling 5 km (3 mi).
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards “E” (Empty) as the fuel level
decreases. When the last fuel meter
segment starts flashing, refuel as
soon as possible.
EAU12348
Handlebar switches
Left
EAU12360
Pass switch “PASS”
Press this switch to flash the head-
light.
EAUE0350
Dimmer switch “
/
”
Set this switch to “
” for the high
beam and to “
” for the low beam.
1. Fuel meter
ZAUE0084
1. Pass switch “
PASS
”
2. Dimmer switch “
/
”
3. Turn signal switch “
/
”
4. Horn switch “
”
1
2
3
4
54CF8199E1.book Page 4 Thursday, April 1, 2010 1:24 PM
