PERIODIC MAINTENANCE AND ADJUSTMENT
6-12
6
TIP
The engine oil should be between the
minimum and maximum level marks.
4. If the engine oil is below the mini-
mum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
5. Install the oil filler cap.
To chan
g
e the en
g
ine oil (with or
without oil filter element replace-
ment)
1. Remove cowling D. (See page
2. Start the engine, warm it up for
several minutes, and then turn it
off.
3. Install the engine oil drain attach-
ment, provided with the owner’s
tool kit, under the drain bolt of the
crankcase.
4. Place an oil pan under the engine
to collect the used oil.
5. Remove the engine oil filler cap
and the drain bolt along with the
O-ring, compression spring, and
engine oil strainer, to drain the oil
from the crankcase.
NOTICE:
When removin
g
the en
g
ine oil
d
rain
b
olt, the O-rin
g
, compres-
sion sprin
g
, an
d
oil strainer will
fall out. Take care not to lose
these parts.
[ECA11002]
1. Engine oil filler cap
1. Dipstick
2. Maximum level mark
3. Minimum level mark
1
2
3
ZAUE1300
1. Engine oil drain bolt (crankcase)
2. Engine oil drain attachment
ZAUM1229
2
U5D7E5E0.book Page 12 Thursday, August 21, 2014 9:30 AM