INSTRUMENT AND CONTROL FUNCTIONS
3-5
3
ton to switch between kilometers
and miles and then press the “SE-
LECT” button for two seconds to
confirm the setting.
Tachometer
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
When the key is turned to “ON”, the ta-
chometer will sweep across the r/min
range and then return to zero r/min in
order to test the electrical circuit.
NOTICE
ECAM1150
Do not operate the en
g
ine in the ta-
chometer hi
g
h-rpm zone.
Hi
g
h-rpm zone: 10000 r/min an
d
a
b
ove
Clock
The clock displays when the key is
turned to “ON”.
To set the clock
1. Turn the key to “ON”.
2. Push the “SELECT” button for at
least two seconds.
3. When the hour digits start flash-
ing, use the “RESET” button to set
the hours.
4. Push the “SELECT” button , and
the minute digits will start flashing.
5. Use the “RESET” button to set the
minutes.
6. Push the “SELECT” button and
then release it to start the clock.
TIP
When setting the hours and minutes,
push the “RESET” button briefly to in-
crease the increment value one by one,
or push and hold the button to increase
the increment value continuously.
Fuel meter
The fuel meter indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel meter disappear to-
wards “E” (Empty) as the fuel level
1. Tachometer
2. High-rpm zone
ZAUM1147
km/h
x1000r/min
1
2
1. Clock
ZAUM1148
1/2
ODO
TRIP1
1
1. Fuel meter
2. Fuel level warning light “
”
3. Fuel reserve tripmeter
4. Information display
ZAUM1149
km/h
Lo
Hi
1/2
FTRIP
x1000r/min
2
1
3
4
U5D7E5E0.book Page 5 Thursday, August 21, 2014 9:30 AM
