Yamaha YZF-R125 2019 Owner'S Manual Download Page 87

Page: 87 / 96

Motorcycle care an

stora

7-5

8. Check and correct the tire air

pressure, and then lift the vehicle
so that all wheels are off the
ground. Otherwise, turn the
wheels a little once a month in or-
der to prevent the tires from be-
coming degraded in one spot.

9. Cover the muffler outlet with a

plastic bag to prevent moisture
from entering it.

10. Remove the battery and fully

charge it, or attach a maintenance
charger to keep the battery opti-
mally charged.

NOTICE:

Confirm

that the

attery an

its char

are compati

le. Do not char

e a

VRLA

attery with a convention-

al char

er.

[ECA26330]

TIP



If the battery will be removed,
charge it once a month and store
it in a temperate location between
0-30 °C (32-90 °F).



See page 6-31 for more informa-
tion on charging and storing the
battery.

UB5GE1E0.book Page 5 Monday, August 26, 2019 3:02 PM

Summary of Contents for YZF-R125 2019

































































































Search results

Summary of Contents for YZF-R125 2019

Reviews:

Related manuals for YZF-R125 2019

Brands by name

Popular brands

Yamaha YZF-R125 2019, Owner'S Manual

Search results

Summary of Contents for YZF-R125 2019

Reviews:

Related manuals for YZF-R125 2019

Brands by name

Popular brands