background image

PERIODIC MAINTENANCE AND ADJUSTMENT

7-10

7

NOTICE

ECA10452

In order to prevent clutch slip-
page (since the transmission oil
also lubricates the clutch), do
not mix any chemical additives.
Do not use oils with a diesel
specification of “CD” or oils of a
higher quality than specified. In
addition, do not use oils labeled
“ENERGY CONSERVING II” or
higher.

Make sure that no foreign mate-
rial enters the transmission.

7. Start the engine, and then let it idle

for several minutes while checking
the transmission for oil leakage. If
oil is leaking, immediately turn the
engine off and check for the cause.

EAU20070

Coolant 

The coolant level should be checked
before each ride. In addition, the cool-
ant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.

EAUM1293

To check the coolant level

1. Place the vehicle on a level sur-

face and hold it in an upright posi-
tion.

2. Remove the radiator cap and

check the coolant level in the radi-
ator. 

WARNING! Never attempt

to remove the radiator cap when
the engine is hot.

 [EWA10381]

1. “CD” specification
2. “ENERGY CONSERVING II”

1

2

1. Radiator cap

U5PA17E0.book  Page 10  Thursday, June 12, 2008  6:51 PM

Summary of Contents for YZ85Y

















































































Reviews: