Yamaha YZ85( P) /LC Owner'S Manual Download | Manualshive

Page: 5 / 88

background image

INTRODUCTION

EAU41544

Congratulations on your purchase of the Yamaha YZ85(B)/YZ85LW(B). This model is the result of Yamaha’s vast experience
in the production of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship
and reliability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you
have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur-
rent product information available at the time of printing, there may be minor discrepancies between your motorcycle and this
manual. If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING

EWA10031

Please read this manual carefully and completely before operating this motorcycle.

WARNING

EWA14351

This motorcycle is designed and manufactured for off-road use only. It is illegal to operate this motorcycle on any
public street, road or highway. Such use is prohibited by law. This motorcycle complies with almost all state off-
highway noise level and spark arrester laws and regulations. Please check your local riding laws and regulations
before operating this motorcycle.

AN IMPORTANT SAFETY MESSAGE:

●

Read this manual completely before operating your motorcycle. Make sure you understand all instructions.

●

Pay close attention to the warning and notice labels on the motorcycle.

●

Never operate a motorcycle without proper training or instruction.

U1SN80E0.book Page 1 Thursday, June 9, 2011 11:24 AM

«
...
3
4
5
6
7
...
»

Summary of Contents for YZ85( P) /LC

























































































Reviews:

No comments

Related manuals for YZ85( P) /LC

Brand: Dakota Digital Pages: 6

Brand: Free Spirits Pages: 28

Multistrada 620

Brand: Ducati Pages: 382

Brand: Yamaha Pages: 26

Brand: Yamaha Pages: 58

Brand: Yamaha Pages: 42

Brand: Yamaha Pages: 92

Brand: Yamaha Pages: 77

Brand: Yamaha Pages: 106

Brand: Yamaha Pages: 88

Brand: Yamaha Pages: 112

Brand: Yamaha Pages: 90

Star Venture 2018

Brand: Yamaha Pages: 116

Brand: Yamaha Pages: 92

Brand: Yamaha Pages: 108

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands