8-20
8
15. Install and tighten the engine oil tank filler
cap.
16. Start the engine, and then let it idle for
several minutes while checking it for oil
leakage. If oil is leaking, immediately turn
the engine off and check for the cause.
17. Turn the engine off, wait at least ten mi-
nutes, and then check the oil level and
correct it if necessary.
18. Install the engine oil tank cover by install-
ing the bolts.
19. Install the panel.
To change the engine oil and oil filter
1. Park the vehicle on a level surface.
2. Loosen the left and right side panels by
removing the bolt as shown.
3. Remove the rear bottom panel by remov-
ing the bolts.
1. Left side panel
2. Right side panel
3. Bolt
3
1
3
2
UB577AE0.book Page 20 Wednesday, June 8, 2016 9:35 AM
Summary of Contents for YXZ10YEXH
Page 12: ...1 3 1 23 22 20 21 18 19 17 UB577AE0 book Page 3 Wednesday June 8 2016 9 35 AM...
Page 22: ...1 13 1 For Oceania 1 2 3 4 1 1 7 3 6 1 5 8 UB577AE0 book Page 13 Wednesday June 8 2016 9 35 AM...
Page 23: ...1 14 1 10 9 11 UB577AE0 book Page 14 Wednesday June 8 2016 9 35 AM...
Page 214: ...11 2 11 1 Model label 1 UB577AE0 book Page 2 Wednesday June 8 2016 9 35 AM...
