manualshive.com logo in svg

Yamaha YXZ1000RSS, Owner'S Manual, Page: 60 / 212

Share
Download
Yamaha YXZ1000RSS Owner'S Manual Download Page 60

4-32

4

To access the storage compartment behind
the driver seat, remove the storage compart-
ment cover. 

WARNING! Fuel vapors can be

a fire or explosion hazard. To avoid injury
or death, never store fuel or flammable liq-
uids in this storage compartment.

 [EWB03230]

NOTICE:

 Do not exceed the specified

maximum load limit for this storage com-
partment.

 [ECB02090]

When storing any documents in the storage
compartments, be sure to wrap them in a
plastic bag so that they will not get wet. When
washing the vehicle, be careful not to let any
water enter the storage compartments.

1. Storage compartment

1

Maximum load limit:

Storage compartment behind driver seat:

4.5 kg (10 lb)

1. Storage compartment cover
2. Turn.

1

2

UB5712E0.book  Page 32  Friday, October 21, 2016  10:19 AM

Summary of Contents for YXZ1000RSS





















































































































































































































Reviews:

No comments