1
2
3
4
5
6
7
8
9
7-2
EAU25991
SCOOTER CARE AND STORAGE
with water, diluted mild deter-
gent with water may be used.
Be sure to rinse off any deter-
gent residue using plenty of
water, as it is harmful to plastic
parts.
●
Do not use any harsh chemical
products on plastic parts. Be
sure to avoid using cloths or
sponges which have been in
contact with strong or abrasive
cleaning products, solvent or
thinner, fuel (gasoline), rust
removers or inhibitors, brake
fl uid, antifreeze or electrolyte.
●
D o n o t u s e h i g h - p r e s s u r e
washers or steam-jet cleaners
since they cause water seep-
age and deterioration in the
following areas: seals (of wheel
and swingarm bearings, fork
and brakes), electric compo-
nents (couplers, connectors,
i n s t r u m e n t s , s w i t c h e s a n d
lights), breather hoses and
vents.
●
For vehicles equipped with a
windshield: Do not use strong
c l e a n e r s o r h a r d s p o n g e s
as they will cause dulling or
s c r a t c h i n g . S o m e c l e a n i n g
compounds for plastic may
leave scratches on the wind-
shield. Test the product on a
small hidden part of the wind-
shield to make sure that it does
n o t l e a v e a n y m a r k s . I f t h e
windshield is scratched, use a
quality plastic polishing com-
pound after washing.
After normal use
Remove dirt with warm water, a mild
detergent, and a soft, clean sponge,
and then rinse thoroughly with clean
water. Use a toothbrush or bottlebrush
for hard-to-reach areas. Stubborn dirt
and insects will come off more easily
if the area is covered with a wet cloth
for a few minutes before cleaning.
After riding in the rain, near the sea or
on salt-sprayed roads
Since sea salt or salt sprayed on the
roads during winter are extremely cor-
rosive in combination with water, carry
out the following steps after each ride
in the rain, near the sea or on salt-
sprayed roads.
TIP
Salt sprayed on roads in the winter
may remain well into spring.
1. Clean the scooter with cold water
and a mild detergent after the en-
gine has cooled down.
NOTICE:
Do not use warm water since it
increases the corrosive action
of the salt.
[ECA10791]
2. A p p l y a c o r r o s i o n p r o t e c t i o n
s p r a y o n a l l m e t a l , i n c l u d i n g
chrome- and nickel-plated, sur-
faces to prevent corrosion.
After cleaning
1. Dry the scooter with a chamois or
an absorbing cloth.
2. Use a chrome polish to shine
chrome, aluminum and stainless-
steel parts, including the exhaust
system. (Even the thermally in-
duced discoloring of stainless-
%&(KPFF
ࡊࡠࠬࠪࠕࡦ ࡊࡠࠬࡑࡦ࠲ࡊࡠࠬࠗࠛࡠ
ࡊࡠࠬࡉ࠶ࠢ
Summary of Contents for YW50FB
Page 15: ...1 2 3 4 5 6 7 8 9 1 8 Q SAFETY INFORMATION KPFF ࡊࡠ ࠬࠪࠕࡦ ࡊࡠ ࠬࡑ ࡦ ࡊࡠ ࠬࠗࠛࡠ ࡊࡠ ࠬࡉ ࠢ ...
Page 74: ...1 2 3 4 5 6 7 8 9 8 3 SPECIFICATIONS KPFF ࡊࡠ ࠬࠪࠕࡦ ࡊࡠ ࠬࡑ ࡦ ࡊࡠ ࠬࠗࠛࡠ ࡊࡠ ࠬࡉ ࠢ ...
Page 82: ...1 2 3 4 5 6 7 8 9 9 8 EAU26343 CONSUMER INFORMATION KPFF ࡊࡠ ࠬࠪࠕࡦ ࡊࡠ ࠬࡑ ࡦ ࡊࡠ ࠬࠗࠛࡠ ࡊࡠ ࠬࡉ ࠢ ...
