ENGINE OIL REPLACEMENT
For information on the jacking points, see page 40.
1.
Remove the bottom panel by removing the bolts
and quick fasteners.
2.
Warm up the engine for several minutes, place
the utility vehicle on a level surface, and then
stop the engine.
Use caution not to touch hot engine oil or hot en-
gine parts during the following procedure. Death
or serious personal injury can result from failing to
comply with the safety instructions in this manual.
3.
Place an oil pan under the engine oil drain plug.
4.
Remove the oil drain plug and let the oil drain
completely.
Dispose of used oil in an environmentally safe way,
such as taking oil to an oil collection station.
TIP
1. Bottom
panel
2. Bolt
3. Quick
fastener
1
2
3
2
WARNING
1. Engine oil drain plug
2. Gasket
2
1
TIP
5.
Install the drain plug, along with a new drain plug
gasket, and finger tighten before tightening to
the following torque:
Drain plug torque:
27 N·m (2.7 kgf·m, 20 lb·ft)
MAINTENANCE AND ADJUSTMENT
42
1
2
3
4
5
6
7
8
9
10
11
12
13
14
©2021Yamaha Golf-Car Company
