background image

 

E-

 

Cautions

 

Cautions

 

Please read the following operating precautions before use:

• When you disconnect the AC adaptor from the AC 

outlet, hold the plug, not the cord.

• If you plan not to use the YST-M45Ds for a while, 

disconnect the AC adaptor from the AC outlet.

• Always disconnect the AC adaptor from the AC 

outlet before making any connections.

• The YST-M45Ds do not contain any user service-

able parts. Refer all servicing to your Yamaha 
dealer.

 

Never open the cabinet.

 

 If a foreign object drops 

into the set, contact your dealer, and do not use the 
YST-M45Ds. Otherwise, you may cause a fire.

• Do not expose the YST-M45Ds to temperature 

extremes, direct sunlight, excessive dust, humidity, 
or vibration.

• Position the YST-M45Ds on a level, stable surface. 

Do not drop the YST-M45Ds, apply excessive 
force to their controls, or put heavy items on top of 
them.

• Do not place small metal objects on the speakers. 

Otherwise, the object may fall, possibly causing an 
injury.

• To protect the YST-M45D speakers, avoid micro-

phone feedback, continuous and excessive output 
from electronic musical instruments, and excessive 
signal distortion.

• If the YST-M45Ds are located close to fluorescent 

or neon lights, a slight hum may be heard. In this 
case, relocate the YST-M45Ds away from the 
light.

• Although the YST-M45D speakers are magneti-

cally shielded, keep floppy disks and tapes away 
from them.

• The YST-M45Ds may cause picture distortion 

when located close to a television or computer 
monitor. In this case, move them away a short dis-
tance.

• Avoid sources of hum (transformers, motors). To 

prevent fire or electrical shock, do not expose to 
rain and water.

• Do not use force on switches, knobs, or cables. 

When you move the YST-M45D, first turn off the 
power to the speakers, then disconnect the AC 
adaptor from the AC outlet and the cables from the 
connected devices.

• Always turn the volume control counterclockwise 

to the minimum before starting to play the audio 
source: increase the volume gradually to an appro-
priate level after the playback has started.

• Though this speaker is a magnetically shielded 

type, there may be some influence on the monitor 
picture depending on the type of monitor or the 
placement of the speaker.  In such a case, place the 
speaker further apart from the monitor until there 
is no influence on the monitor picture.

• When placing the provided AC adaptor on the 

desk, etc., be sure to fix the adaptor on the desk, 
etc. to prevent it from falling. If the adaptor falls, it 
may cause personal injury or damage to the adap-
tor and/or other equipment. 

Note for headphone:

When you use headphones, make sure that they have a 
cable of less than 3m. (UK and Europe models)

 

Table of Contents

 

Introducing the YST-M45D Speaker System........ 1

Controls & Connectors............................................ 2

Installing USB driver ............................................... 3

 

Microsoft Windows 98/98SE or Windows Me ...... 4
Microsoft Windows 2000 Professional .................. 6
Macintosh computer............................................... 8

 

Connecting to a non-USB system ............................ 8

Enjoying your YST-M45D Speaker System .......... 8

 

Adjusting the Volume, Bass, and Treble ................ 8

 

Troubleshooting........................................................ 9

Non skid pad ........................................................... 10

Specifications .......................................................... 10

Summary of Contents for YST-M45D
















Reviews: