NETWORKS
➤
Connecting to a network
En
52
Wired network connections
To use a wired network connection, connect the unit to a router via an STP network
cable (category 5 or higher straight cable; not supplied).
• If the unit is already connected to a wireless network and you would like to switch to a wired connection,
change “Network” in the setup menu to “Wired”.
Wireless network
Connect the unit to a wireless router (access point).
The
indicator on the front panel glows when the unit is connected to a wireless
network.
• You cannot use the wireless network connection simultaneously with the wired network connection (p. 52)
or Wireless Direct (p. 59).
• If the unit and the wireless router (access point) are too far apart, the unit may not connect to a wireless
router (access point). In such case, place them close to each other.
• If the unit will not be connected to a wireless router (access point), Wireless Direct (p. 59) can be used to
connect the unit directly to a mobile device to control the unit using the HOME THEATER CONTROLLER
(WLAN) app installed on that mobile device.
SYSTEM
CONNCETOR
AUX2
TV
OPTICAL
IN 1
(HDCP2.2)
IN 2
IN 3
IN 4
OUT
(ARC)
HDMI
IR-IN
IR-OUT
UPDATE ONLY
RS-232C
NETWORK
SUBWOOFER
OUT
R
L
AUX1
NETWORK
LAN
WAN
The unit (rear)
Internet
Network Attached Storage
(NAS)
PC
Modem
Mobile device
Router
Network cable
The unit
Internet
Modem
Mobile device
Wireless router
(access point)
Glows (green)
