Yamaha YQ50/YQ50L Owner'S Manual Download Page 27

Page: 27 / 84

INSTRUMENT AND CONTROL FUNCTIONS

EAU03091

Rider seat

To open the rider seat

1. Place the scooter on the

centerstand.

2. Insert the key into the main switch,

and then turn it counterclockwise.

NOTE :
Do not push inward when turning the
key.

3. Fold the rider seat up.

To close the rider seat

1. Fold the rider seat down, and then

push it down to lock it in place.

2. Remove the key from the main

switch if the scooter will be left
unattended.

NOTE :
Make sure that the seat is properly
secured before riding.

ZAUM0264

1. Seat

3-9

EAU03839

Starter (choke) lever " "

Starting a cold engine requires a richer
air-fuel mixture, which is supplied by the
starter (choke).

•

Move the lever in direction a to
turn on the starter (choke).

•

Move the lever in direction b to
turn off the starter (choke).

1. Starter (choke) lever " "

ZAUM0293

Ofrecido por www.electromanuales.com

Summary of Contents for YQ50/YQ50L





















































































Search results

Summary of Contents for YQ50/YQ50L

Reviews:

Related manuals for YQ50/YQ50L

Brands by name

Popular brands

Yamaha YQ50/YQ50L, Owner'S Manual

Search results

Summary of Contents for YQ50/YQ50L

Reviews:

Related manuals for YQ50/YQ50L

Brands by name

Popular brands