manualshive.com logo in svg

Yamaha YP125R, Owner'S Manual

Share
Download
Yamaha YP125R Owner'S Manual Download Page 67

PERIODIC MAINTENANCE AND ADJUSTMENT

6-19

6

WARNING

EWA10511

Never overload your vehicle. Opera-
tion of an overloaded vehicle could
cause an accident.

Tire inspection

The tires must be checked before each
ride. If the center tread depth reaches
the specified limit, if the tire has a nail or
glass fragments in it, or if the sidewall is
cracked, have a Yamaha dealer re-
place the tire immediately.

TIP

The tire tread depth limits may differ
from country to country. Always comply
with the local regulations.

Tire information

This model is equipped with tubeless
tires.
Tires age, even if they have not been
used or have only been used occasion-
ally. Cracking of the tread and sidewall
rubber, sometimes accompanied by
carcass deformation, is an evidence of
ageing. Old and aged tires shall be
checked by tire specialists to ascertain
their suitability for further use.
After extensive tests, only the tires list-
ed below have been approved for this
model by Yamaha Motor Co., Ltd.

Tire air pressure (measured on cold 
tires):

0–90 kg (0–198 lb):

Front:

190 kPa (1.90 kgf/cm², 28 psi)

Rear:

220 kPa (2.20 kgf/cm², 32 psi)

YP125R 90–180 kg (198–398 lb)
YP125RA 90–172 kg (198–379 lb):

Front:

210 kPa (2.10 kgf/cm², 30 psi)

Rear:

250 kPa (2.50 kgf/cm², 36 psi)

Maximum load*:

YP125R 180 kg (398 lb)
YP125RA 172 kg (379 lb)

* Total weight of rider, passenger, car-

go and accessories 

1. Tire tread depth
2. Tire sidewall

Minimum tire tread depth (front and 
rear):

1.6 mm (0.06 in)

1

2

ZAUM0054

U2ABE2E0.book  Page 19  Thursday, August 30, 2012  2:36 PM

Summary of Contents for YP125R

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands