Yamaha YP125R Owner'S Manual Download Page 32

Page: 32 / 96

INSTRUMENT AND CONTROL FUNCTIONS

3-14

front and rear wheel hubs, otherwise
the magnetic rotors equipped in the
wheel hubs may be damaged, result-
ing in improper performance of the
ABS system.

EAUS1661

Fuel tank cap

To open the fuel tank cap

1. Open the fuel tank cap cover by

pushing in on the front end of it.

2. Insert the key in the lock and turn it

clockwise. The lock will be re-
leased and the fuel tank cap can
be removed.

To close the fuel tank cap

1. Be sure the match mark is facing

forward, and then push the fuel
tank cap into the original position.

2. Turn the key counterclockwise and

remove it.

1. Rear wheel hub

2. Front wheel hub

1. Fuel tank cap

2. Fuel tank cap cover

1. Lock.
2. Fuel tank cap

1. Match marks

U2ABE2E0.book Page 14 Thursday, August 30, 2012 2:36 PM

Summary of Contents for YP125R

































































































Search results

Summary of Contents for YP125R

Reviews:

Brands by name

Popular brands

Yamaha YP125R, Owner'S Manual

Search results

Summary of Contents for YP125R

Reviews:

Brands by name

Popular brands