Yamaha YHT-893 Page 74 Owner'S Manual Download

Page: 74 / 98

APPENDIX

Troubleshooting

HDMI™

Tuner (FM/AM)

Problem

Cause

Remedy

See

page

The front panel

display HDMI

indicator is flashing.

An error with the HDMI

connection has occurred.

Try re-inserting the HDMI cable.

—

Confirm that HDMI video that is not

supported by the unit is not being input

(HDMI Input

→

Option menu

→

“Signal

Info”).

No picture or sound.

The number of components is over

the limit.

Disconnect some of the HDMI components.

—

The connected HDMI component

does not support high-bandwidth

digital copyright protection

(HDCP).

Connect an HDMI component that supports

HDCP.

—

(When using HDMI

Control function)

TV sound is not

output from this unit

when operating the

remote control of the

TV.

The TV audio output is not

connected to this unit, or the

setting to match operations carried

out on TV is not set.

Connect the TV audio output to this unit,

and then select the connected input source

in “TV Audio In” (Setup menu

→

HDMI

Setup

→

TV Audio In).

(When using Audio Return

Channel function)

The Audio Return Channel

function is not working.

Make sure that your TV supports Audio

Return Channel.

Set the Audio Return Channel function to

on (Setup menu

→

HDMI Setup

→

AudioReturnChan).

Problem

Cause

Remedy

See

page

FM stereo reception

is noisy.

You are too far from the station

transmitter, or the input from the

antenna is weak.

Check the antenna connections.

Switch to monaural mode.

Replace the outdoor antenna with a more

sensitive multi-element antenna.

—

There is distortion,

and clear reception

cannot be obtained

even with a good FM

antenna.

There is multi-path interference.

Adjust the antenna height or orientation, or

place it in a different location.

—

The desired station

cannot be tuned into

with the automatic

tuning method.

You are in an area far from a

station, or input from the antenna

is weak.

Replace the outdoor antenna with a more

sensitive multi element antenna.

—

Use

TUNING

to manually select the

station.

“No Presets” is

displayed.

No preset stations are registered.

preset stations before operation.

“Wrong Station” is

displayed.

An invalid FM/AM frequency has

been input.

Input a frequency that can be received.

—

Summary of Contents for YHT-893

































































































Search results

Summary of Contents for YHT-893

Reviews:

Related manuals for YHT-893

Brands by name

Popular brands

Yamaha YHT-893, Owner'S Manual

Search results

Summary of Contents for YHT-893

Reviews:

Related manuals for YHT-893

Brands by name

Popular brands