En
47
SETUP
Configuring the settings specific for each input source (Option menu)
■
Combining HDMI/AV1-2 input source
video and audio
Input source:
HDMI1-4, AV1-2
Combines video from HDMI or AV input sources with analog/
digital audio inputs in situations such as:
–
an playback device is connected with an HDMI cable but cannot
transmit audio through HDMI
–
an playback device with component video output and analog
audio output (such as certain game consoles) are connected to the
system
To change assignments, select an input source (HDMI1-4 or AV1-2)
as the video input first, and then select audio input jacks in this
menu.
Set as follows according on the desired combination of audio input
jacks.
■
Displaying information on audio/video
signals
Input source:
HDMI1-4, AV1-4
J
1
Displays information on digital audio and video signals on the TV
screen.
Audio information
Video information
Audio In
Audio inputs
Settings method
Optical digital audio
input
Select AV1 or AV4. Connect the external component
audio cable to the optical digital jack for the selected
input.
Coaxial digital audio
input
Select AV2 or AV3. Connect the external component
audio cable to the coaxial digital jack for the selected
input.
Analog audio input
Select one of AV5, AV6, AUDIO1, or AUDIO2.
Connect the external component audio cable to the
audio jack for the selected input.
HDMI1OPTION
AudioIn
;;;;;;
AV1
Assignable audio input jacks
Inputs that change the audio source
•
For details of settings, refer to “Receiving video signals from the
HDMI jack and audio signals from a jack other than HDMI”
) and “Component connections to analog audio output
•
To return audio inputs to their previous settings, display this item
again, and select the original input jack.
Signal Info
HDMI1OPTION
Channel3/2/0.1
AUDIO
FormatDolbyD
Sampling48kHz
InHDMI1080p
OutHDMI1080p
Bitrate384kbps
VIDEO
Menu item
Information
Format
Format of audio signals.
Channel
The number of input signal channels (front/surround/
LFE).
For example, if input signal channels are 3 front
channels, 2 surrounds and LFE, “3/2/0.1” is
displayed.
If a channel that cannot be expressed as the above, a
total number of channels such as “5.1ch” may be
displayed.
Sampling
The sampling frequency of analog-to-digital
conversion.
Bitrate
The bit rate of input signal per second.
In
Format and resolution of video input signal.
Out
Format and resolution of video output signal.
Message
(appears only
when an error
has occurred)
Error messages about HDMI signals and components.
Error message
HDCP Error
HDCP authentication failed.
Device Over
The number of connected HDMI
components is over the limit.
Out of Res.
The connected monitor is not
compatible with the video input
signal.
•
“No Signal” is displayed when no signals are being received, and
“---” is displayed if this unit cannot recognize the incoming
signal.
•
The bit rate may vary during playback.
J
J
1 :
AV5-6 or AUDIO1-2 are also available when the “Audio Return Channel”
function is on, and the source is used for the TV audio input (TV Audio In).
