Yamaha YHT-393 Owner'S Manual Download Page 59

Page: 59 / 80

APPENDIX

Troubleshooting

Remote control

iPod™/iPhone™

Problem

Cause

Remedy

See

page

The remote control

does not work or

function properly.

Wrong distance or angle.

The remote control will function within a

maximum range of 20 ft / 6 m, and no more

than 30 degrees off-axis from the front

panel.

—

Direct sunlight or lighting (from

an inverter type of fluorescent

lamp, strobe light, etc.) is striking

the remote control sensor of this

unit.

Adjust the lighting angle, or reposition this

unit.

—

The batteries are weak.

Replace all batteries.

The remote control ID of the

remote control and this unit do not

match.

Match the remote control ID of this unit and

the remote control.

External components

cannot be controlled

using the remote

control.

The remote control code is not

correctly set.

Set the remote control code correctly using

“

Remote control code search

” on the CD-

ROM.

—

Try setting another code for the same

manufacturer using “

Remote control code

” on the CD-ROM.

—

If this unit does not work when you press

Cursor

(on the remote

control), do the following.

When the key does not work during DVD

disc menu operation: press the

Input

selector

(on the remote control) again.

—

When the key does not work during Option

menu/Setup menu operation: press the key

corresponding to the current menu operation

again.

—

Even if the remote control code is correctly

set, there are some models that do not

respond to the remote control.

—

Display

Cause

Remedy

See

page

The unit is in the process of

recognizing the connection with

your iPod/iPhone.

—

The unit is in the middle of

acquiring song lists from your

iPod/iPhone.

—

Connect error

There is a problem with the signal

path from your iPod/iPhone to the

unit.

Turn off the unit and reconnect the Yamaha

iPod universal dock to the DOCK jack of

the unit.

Remove your iPod/iPhone from the Yamaha

iPod universal dock and then place it back in

the dock.

Unknown iPod

The iPod/iPhone being used is not

supported by the unit.

Connect an iPod/iPhone supported by the

unit.

—

iPod connected

Your iPod/iPhone is properly

placed in the Yamaha iPod

universal dock.

—

Disconnected

Your iPod/iPhone is removed from

the Yamaha iPod universal dock.

—

Unable to play

The unit cannot play back the

songs currently stored on your

iPod/iPhone.

Check that songs are currently stored on

your iPod/iPhone.

—

Summary of Contents for YHT-393















































































Search results

Summary of Contents for YHT-393

Reviews:

Related manuals for YHT-393

Brands by name

Popular brands

Yamaha YHT-393, Owner'S Manual

Search results

Summary of Contents for YHT-393

Reviews:

Related manuals for YHT-393

Brands by name

Popular brands