YHT-34 Q
U I C K
-C
O N N E C T
G
U I D E
9
I
NITIAL
A
DJUSTMENT
O
F
T
HE
YST-SW45 S
UBWOOFER
To achieve optimum volume balance between the
YST-SW45 Subwoofer and the NS-A328 Main Speakers,
perform the following procedure:
1. Insert the YST-SW45’s power plug into an ac outlet.
2. On the YST-SW45’s rear panel, slide the POWER
switch to ON.
3. On the YST-SW45’s front panel, set the VOLUME
control to 0 (minimum setting), the HIGH CUT
control to its midpoint position, and press the
STANDBY/ON switch to ON. Then power on all
other components.
OFF
ON
To AC Outlet
YST-SW45 Subwoofer
(Rear Panel)
POWER
OUTPUT
TO SPEAKERS
INPUT 2
AUTO
STANDBY
LOW
OFF
HIGH
FROM AMPLIFIER
INPUT 1
❸
❷
❶
HIGH CUT
STANDBY/ON
50 Hz
150 Hz
VOLUME
0
10
Initial Settings
(on Front Panel)
OFF
ON
POWER
4. Play an audio source and adjust the HTR-5450’s
VOLUME control to a desired listening level.
5. On the YST-SW45’s front panel, increase the
VOLUME control gradually to adjust the balance
the volume between the YST-SW45 Subwoofer and
the NS-A328 Main Speakers.
NOTE: Once the volume is balanced between the
subwoofer and the main speakers, you can adjust the
volume of your whole sound system by using the
HTR-5450's VOLUME control.
