Yamaha YFM90RYXJ Owner'S Manual Download

Page: 116 / 132

8-33

NOTICE

ECB00942



Always keep the battery charged. Storing the
battery in a discharged state for an extended
period of time will cause permanent battery
damage.



Do not store the battery in an excessively
cold or warm place [below freezing or above
30 °C (90 °F)].

To install the battery

1. Place the battery in its compartment.
2. Connect the positive battery lead first, then

connect the negative battery lead by installing
their bolt.

NOTICE:

When installing the bat-

tery, the main switch must be off, and the
positive lead must be connected before
the negative lead.

[ECB01111]

3. Hook the battery band.
4. Install the seat. (See page 4-12.)

TIP



Make sure the positive and negative battery
leads are installed as shown.



Fully charge the battery before installing it.

1. Positive battery lead (red)
2. Negative battery lead (black)

UBD362E0.book Page 33 Tuesday, January 31, 2017 5:10 PM

Summary of Contents for YFM90RYXJ





































































































































Search results

Summary of Contents for YFM90RYXJ

Reviews:

Related manuals for YFM90RYXJ

Brands by name

Popular brands

Yamaha YFM90RYXJ, Owner'S Manual

Search results

Summary of Contents for YFM90RYXJ

Reviews:

Related manuals for YFM90RYXJ

Brands by name

Popular brands