4-20
4
TIP
●
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
●
The spring preload setting is determined by
measuring distance A, shown in the illustration.
The shorter distance A is, the higher the spring
preload; the longer distance A is, the lower the
spring preload. With each complete turn of the
adjusting nut, distance A is changed by 1.5 mm
(0.06 in).
3. Tighten the locknut to the specified torque.
NOTICE:
Always tighten the locknut
against the adjusting nut, and then tighten
it to the specified torque.
[ECB00081]
1. Spring preload adjusting nut
2. Locknut
3. Special wrench
1
(b)
(a)
2
3
Spring preload setting:
Minimum (soft):
Distance A = 243.0 mm (9.57 in)
Standard:
Distance A = 233.0 mm (9.17 in)
Maximum (hard):
Distance A = 228.0 mm (8.98 in)
1. Distance A
1
U1PE60E0.book Page 20 Friday, March 2, 2012 1:22 PM
Summary of Contents for YFM7RD
