background image

2-4

2

Never maintain an ATV without proper knowl-
edge. Contact an authorized ATV dealer to in-
form you on basic ATV maintenance. Certain
maintenance can only be carried out by certified
staff.

In the event of an accident

1. If serious injuries are incurred, you may be

safer staying next to your vehicle; it may
shield you from oncoming riders. Depending
on your injuries and position in the trail; you
must make a judgment call as to whether you
should move to a position off the trail. If you
have sustained head, neck, or back injuries,
or cannot feel your limbs, you should not
move. Keep your helmet on and remain mo-
tionless. Lie down next to your vehicle and
wait for help.

2. If less serious injuries are incurred and you

can walk, then move to a position off the trail.
Check yourself for injuries and apply first aid
as needed.

3. If your injuries are light, when safe to do so,

move your vehicle off the trail to avoid colli-
sions with oncoming riders. Check for injuries
and apply first aid as necessary. If you can
physically operate your vehicle, inspect your

vehicle. If the vehicle is in safe operating con-
dition and you can safely operate it, restart it
and ride gently back to camp or other known
location where you can receive medical at-
tention. If necessary, contact your riding party
or local authorities to let them know where
you are and what has happened.

In the event of a breakdown

1. If your vehicle will not restart or is not in safe

operating condition, turn off the main switch
and engine stop switch. If the breakdown oc-
curs at twilight or night, leave the main switch
on so that your lights may warn other riders of
your stopped vehicle.

2. Get out of danger. Check for oncoming vehi-

cles and when safe, push your vehicle to the
side of the trail or even off the main trail to
avoid any possible collisions with oncoming
riders. If you cannot move your vehicle by
yourself, when safe, walk to the nearest van-
tage point and signal an oncoming rider to
help you push your vehicle to a safe place off
the trail.

3. Inspect your vehicle for any immediate haz-

ardous conditions. The most obvious hazard-
ous conditions are leaking fuel and

U2LS61E0.book  Page 4  Friday, April 17, 2015  8:25 AM

Summary of Contents for YFM70RSBG

































































































































































Reviews:

Related manuals for YFM70RSBG