manualshive.com logo in svg

Yamaha YFM700RSE, Owner'S Manual

The Yamaha YFM700RSE Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining the Yamaha YFM700RSE. Don't miss the chance to access this essential manual at manualshive.com and enhance your ATV riding experience.

Share
Download
background image

5-7

5

Aftermarket tires and rims

The tires and rims that came with your ATV were
designed to match the performance capabilities
and to provide the best combination of handling,
braking, and comfort. Other tires, rims, sizes, and
combinations may not be appropriate.

EBU19841

Chassis fasteners

Make sure that all nuts, bolts and screws are
properly tightened.

EBU19851

Instruments, lights and switches

Check that all instruments, lights and switches are
working properly. Correct if necessary.

Front:

Manufacturer/model:

MAXXIS/M971Y Bias

Size:

AT21 x 7-10

Type:

Tubeless

Rear:

Manufacturer/model:

MAXXIS/M976Y Bias

Size:

AT20 x 10-9

Type:

Tubeless

U1VS60E0.book  Page 7  Tuesday, October 8, 2013  1:05 PM

Summary of Contents for YFM700RSE

























































































































































Reviews:

No comments

Related manuals for YFM700RSE

Brands by name

Popular brands

Load more brands