8-32
8
TIP
To check the rear brake fluid level, remove the
seat. (See page 4-11.)
To access the rear brake fluid reservoir for replen-
ishing:
1. Remove the bolt and quick fastener screw.
2. Pull the cowling slightly outward as shown.
3. After replenishing, place the cowling in the
original position, and then install the bolt and
quick fastener screw.
WARNING
EWB02721
Improper maintenance can result in loss of
braking ability. Observe these precautions:
1. Quick fastener screw
2. Bolt
1
2
1. Cowling
2. Brake fluid reservoir cap
Specified brake fluid:
DOT 4
1
2
U1VS60E0.book Page 32 Tuesday, October 8, 2013 1:05 PM
