Yamaha YFM45FGZ Owner'S Manual Download

Page: 30 / 166

4-3

●

Start the engine after making sure that the
warning light is out. Continuous use while
the warning light is on may cause damage to
the engine.

EBU29621

On-Command four-wheel-drive indicator “

”,

On-Command differential gear lock
indicator “

” and indicator light “DIFF.

LOCK”

The On-Command four-wheel-drive indicator “

”

comes on when the On-Command four-wheel-
drive switch is set to the “4WD” position.
The On-Command differential gear lock
indicator “

” and the On-Command differential

gear lock indicator light “DIFF. LOCK” come on
when the On-Command differential gear lock
switch is set to the “LOCK” position.

TIP

●

Due to the synchronizing mechanism in the dif-
ferential gear case, the four-wheel-drive indica-
tor may not come on until the ATV starts moving.

●

When the On-Command differential gear lock
switch is set to “LOCK”, the indicator “

” and

the indicator light “DIFF. LOCK” will flash until
the differential gear is locked. If the indicator and

the indicator light continue to flash, the differen-
tial is not locked. In this case, start moving to al-
low time for the differential to lock.

EBU17970

Park indicator light “

”

This indicator light comes on when the transmis-
sion is in the park position.

EBU17980

High-range indicator light “

”

This indicator light comes on when the transmis-
sion is in the high-range position.

EBU17990

Low-range indicator light “

”

This indicator light comes on when the transmis-
sion is in the low-range position.

U37S61E0.book Page 3 Tuesday, June 2, 2009 10:33 AM

Summary of Contents for YFM45FGZ







































































































































































Search results

Summary of Contents for YFM45FGZ

Reviews:

Related manuals for YFM45FGZ

Brands by name

Popular brands

Yamaha YFM45FGZ, Owner'S Manual

Search results

Summary of Contents for YFM45FGZ

Reviews:

Related manuals for YFM45FGZ

Brands by name

Popular brands