manualshive.com logo in svg

Yamaha YFM45FGZ, Owner'S Manual

Share
Download
Yamaha YFM45FGZ Owner'S Manual Download Page 156

10-2

10

Type:

SAE 5W-30, 10W-30, 10W-40, 15W-40, 20W-40 or 20W-
50

Recommended engine oil grade:

API service SG type or higher, JASO standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

2.30 L (2.43 US qt, 2.02 Imp.qt)

With oil filter cartridge replacement:

2.40 L (2.54 US qt, 2.11 Imp.qt)

Final gear oil:

Type:

YFM450FAZ Yamaha Friction Modified Shaft Drive Gear 
Oil (Part No.: ACC-SHAFT-LU-00)
YFM45FGHZ Yamaha Friction Modified Shaft Drive Gear 
Oil
YFM45FGZ Yamaha Friction Modified Shaft Drive Gear 
Oil

Quantity:

0.50 L (0.53 US qt, 0.44 Imp.qt)

Differential gear oil:

Type:

YFM450FAZ Yamaha Friction Modified Shaft Drive Gear 
Oil (Part No.: ACC-SHAFT-LU-00) or SAE 80 API GL-4 
Hypoid gear oil
YFM45FGHZ Yamaha Friction Modified Shaft Drive Gear 
Oil or SAE 80 API GL-4 Hypoid gear oil
YFM45FGZ Yamaha Friction Modified Shaft Drive Gear 
Oil or SAE 80 API GL-4 Hypoid gear oil

Quantity:

0.23 L (0.24 US qt, 0.20 Imp.qt)

Cooling system:

Coolant reservoir capacity (up to the maximum level mark):

0.25 L (0.26 US qt, 0.22 Imp.qt)

Radiator capacity (including all routes):

1.30 L (1.37 US qt, 1.14 Imp.qt)

Air filter:

Air filter element:

Wet element

-20

-10

0

10

20

30

40

50 ˚C

SAE 15W-40

SAE 20W-40

SAE 20W-50

SAE 10W-40

SAE 5W-30

SAE 10W-30

U37S61E0.book  Page 2  Tuesday, June 2, 2009  10:33 AM

Summary of Contents for YFM45FGZ







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands