Yamaha YFM450FAT Owner'S Manual Download Page 159

Page: 159 / 194

8-47

EBU00356

Cable inspection and lubrication

Lubricate the inner cables and the cable ends.
If the cables do not operate smoothly, ask a
Yamaha dealer to replace them.

EBU12600

Lubricating the brake levers and brake
pedal

Lubricate the pivoting parts.

NOTE:

To access the brake pedal pivot, remove pan-
el B. (See page 8-9 for panel removal and in-
stallation procedures.)

WARNING

POTENTIAL HAZARD

Damaged control cables.

WHAT CAN HAPPEN

Corrosion can result when the outer
covering of control cables becomes
damaged. Cables can also become
frayed or kinked. Operation of controls
could be restricted, which could cause
an accident or injury.

HOW TO AVOID THE HAZARD

Inspect cables frequently. Replace dam-
aged cables.

Recommended lubricant:

Yamaha chain and cable lube or
SAE 10W30 motor oil

Recommended lubricant:

Lithium-soap-based grease
(all-purpose grease)

U1D910.book Page 47 Thursday, May 27, 2004 11:08 AM

Summary of Contents for YFM450FAT



































































































































































































Search results

Summary of Contents for YFM450FAT

Reviews:

Related manuals for YFM450FAT

Brands by name

Popular brands

Yamaha YFM450FAT, Owner'S Manual

Search results

Summary of Contents for YFM450FAT

Reviews:

Related manuals for YFM450FAT

Brands by name

Popular brands