manualshive.com logo in svg

Yamaha YFM35XX, Owner'S Manual, Page: 133 / 150

Share
Download
Yamaha YFM35XX Owner'S Manual Download Page 133

10-3

10

Rear tire:

Type:

Tubeless

Size:

AT23 x 10-12

Manufacturer/model:

MAXXIS/M938

Loading:

Maximum loading limit:

100.0 kg (220 lb)
(Total weight of rider, cargo, accessories, and tongue)

Tire air pressure (measured on cold tires):

Recommended:

Front:

25.0 kPa (3.6 psi) (0.250 kgf/cm²)

Rear:

25.0 kPa (3.6 psi) (0.250 kgf/cm²)

Minimum:

Front:

22.0 kPa (3.2 psi) (0.220 kgf/cm²)

Rear:

22.0 kPa (3.2 psi) (0.220 kgf/cm²)

Maximum:

Front:

28.0 kPa (4.1 psi) (0.280 kgf/cm²)

Rear:

28.0 kPa (4.1 psi) (0.280 kgf/cm²)

Front wheel:

Wheel type:

Panel wheel

Rim size:

12 x 6.0AT

Rear wheel:

Wheel type:

Panel wheel

Rim size:

12 x 7.5AT

Front brake:

Type:

Dual disc brake

Operation:

Right hand operation

Recommended fluid:

DOT 4

Rear brake:

Type:

Drum brake

Operation:

Left hand and right foot operation

Front suspension:

Type:

Double wishbone

Spring/shock absorber type:

Coil spring/oil damper

Wheel travel:

160 mm (6.3 in)

Rear suspension:

Type:

Swingarm (monocross)

Spring/shock absorber type:

Coil spring/oil damper

U3D512E0.book  Page 3  Thursday, May 10, 2007  4:07 PM

Summary of Contents for YFM35XX























































































































































Reviews:

No comments