manualshive.com logo in svg

Yamaha YFM35XX, Owner'S Manual, Page: 117 / 150

Share
Download
Yamaha YFM35XX Owner'S Manual Download Page 117

8-36

8

in a wheel hub or if a wheel does not turn smoothly,
have a Yamaha dealer check the wheel hub bear-
ings.

EBU25100

Lubricating the steering shaft 

The steering shaft must be lubricated at the inter-
vals specified in the periodic maintenance and lu-
brication chart.

EBU25212

Battery 

This model is equipped with a sealed-type (MF)
battery, which does not require any maintenance.
There is no need to check the electrolyte or to add
distilled water. Check and, if necessary, tighten the
battery lead connections.

CAUTION:

ECB00620

Never attempt to remove the battery cell seals,
as this would permanently damage the battery.

WARNING

EWB02140

Recommended lubricant:

Lithium-soap-based grease

POTENTIAL HAZARD
Failure to handle batteries or battery electro-
lyte carefully.
WHAT CAN HAPPEN
You could be poisoned. You could be se-
verely burned by the sulfuric acid in battery
electrolyte. Batteries produce explosive gas-
es.
HOW TO AVOID THE HAZARD
Avoid contact with skin, eyes or clothing. Al-
ways shield eyes when working near batter-
ies. Keep out of reach of children.
Antidote:
EXTERNAL: Flush with water.
INTERNAL: Drink large quantities of water or
milk. Follow with milk of magnesia, beaten
egg or vegetable oil. Get prompt medical at-
tention.
EYES: Flush with water for 15 minutes and
get prompt medical attention. Keep batteries
away from sparks, flames, cigarettes or oth-
er sources of ignition. Ventilate when charg-
ing or using in a closed space.

U3D512E0.book  Page 36  Thursday, May 10, 2007  4:07 PM

Summary of Contents for YFM35XX























































































































































Reviews:

No comments