Yamaha YFM250R-W, Owner'S Manual

Page: 38 / 140

4-20
4
NOTICE
ECB00090
Never turn an adjusting mechanism beyond
the minimum and maximum settings.
TIP
Although the total number of clicks of a damping
force adjusting mechanism may not exactly match
the above specifications due to small differences in
production, the actual number of clicks always rep-
resents the entire adjusting range. To obtain a pre-
cise adjustment, it would be advisable to check the
number of clicks of each damping force adjusting
mechanism and to modify the specifications as
necessary.
WARNING
EWB02490
●
Suspension components become hot during
operation. Never touch the compression
damping force adjusting bolt and screw, the
rebound damping force adjusting screw or
the oil reservoir with your bare hand or skin
until suspension components have cooled.
●
Always adjust the shock absorber assem-
blies on the left and right side to the same
setting.
● Uneven adjustment can cause poor handling
and loss of stability, which could lead to an
accident.
EBU28240
Adjusting the rear shock absorber as-
sembly (YFM250R-W)
The spring preload can be adjusted to suit the rid-
er’s weight and the riding conditions.
Adjust the spring preload as follows.
1. Loosen the locknut.
2. Turn the adjusting nut in direction (a) to in-
crease the spring preload and thereby harden
the suspension, and in direction (b) to de-
crease the spring preload and thereby soften
the suspension.
U33B70E0.book Page 20 Wednesday, June 11, 2008 1:38 PM