INSTALLING THE INCLUDED PARTS
– 14 –
7
9
Hook the claw
i
of the battery cover to the
hook part
h
of the motor cover, and then install
the battery cover
c
along the frame.
Install the collars
b
(2 pcs), and then tighten
the bolts
a
(2 pcs) to the specified torque.
14. Adjusting the display unit’s time
TIP
Adjust the time with the button cell battery installed.
If the time is adjusted without a battery installed,
the time set will not be kept.
A. Press the power switch
a
to turn on the power.
B. Press and hold the function select switch
b
(2
seconds or longer) until the function display
c
switches to the main menu display.
C. Press the “
▼
” assist mode switch
d
, display
“TIME ADJ” on the main menu display, then
press the function select switch
b
to set.
D. The hours value increases when the “
▲
” assist
mode switch
f
is pressed while the “Hour” sec-
tion of the clock
e
is flashing.
The hours value decreases when the “
▼
” assist
mode switch
d
is pressed.
Press the function select switch
b
to set the
hours.
a
c
h
i
b
Tightening tor
qu
e 2.0 N·m (0.20 kgf·m, 1.5 l
b
·ft)
d
b
a
c
d
f
e
b
X1V-28107-10.book 14 ページ ２０２０年８月３日 月曜日 午後４時１１分
Summary of Contents for YDX-MORO Pro
Page 5: ...INCLUDED PARTS 3 7 9 1 2 3 4 5 0 w 7 8 9 q e r t 6 y ...
Page 20: ......
