Yamaha YBR125ESD, Owner'S Manual

Page: 29 / 82

FOR YOUR SAFETY – PRE-OPERATION CHECKS
4-2
4
Throttle grip
• Make sure that operation is smooth.
• Check cable free play.
• If necessary, have Yamaha dealer adjust cable free play and lubricate cable and
grip housing.
6-13, 6-23
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
6-23
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-21, 6-22
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-14, 6-15
Shift pedal
• Make sure that operation is smooth.
• Correct if necessary.
—
Brake pedal
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
6-24
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-24
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
6-25
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches • Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
3-11
Battery
• Check fluid level.
• Fill with distilled water if necessary.
6-27
ITEM CHECKS PAGE
U51PE0E0.book Page 2 Thursday, October 8, 2009 3:58 PM