PREPARATION
➤
Connecting the unit
En
13
Connect video devices such as BD/DVD players, cable or satellite set-top boxes (STBs),
and game consoles to the unit. Depending on the video/audio output jacks available on
your video device, choose one of the following connections. We recommend using an
HDMI connection if the video device has an HDMI output jack.
HDMI connection
Connect a video device to the unit with an HDMI cable (not supplied).
NOTE
• This unit supports HDCP version 2.2, a copy protection technology.
The audio/video played on the video device will be output though the unit by switching
the unit’s input to HDMI 1 or 2 using the HDMI 1 or 2 key on the remote control.
HINT
• Once the HDMI control function has been activated (p. 46), video and audio content from playback devices
can be output from the TV even when this unit is off (HDMI signal pass-through).
• Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m (16 ft) is
recommended to prevent degradation of signal quality.
• For playback of 3D and 4K video content, use a high-speed HDMI cable.
Coaxial connection
Connect a video device to this unit via a coaxial digital cable. Next, connect the video
device’s video output to the TV’s video input.
The audio played on the video device will be output though the unit by switching the
unit’s input to COAXIAL using the COAXIAL key on the remote control.
Connecting playback devices
HDMI
IN 1
IN 2
HDMI
HDMI
HDMI
Center unit (rear)
HDMI IN 1 and 2 jacks
HDMI output
Video device
COAXIAL
COAXIAL
C
C
Center unit (rear)
COAXIAL input jack
Audio output
(coaxial digital)
Video device
TV
To video
output jack
To video
input jack
