background image

En

1

Read these instructions.

2

Keep these instructions.

3

Heed all warnings.

4

Follow all instructions.

5

Do not use this apparatus near water.

6

Clean only with dry cloth.

7

Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions.

8

Do not install near any heat sources such as radiators, 
heat registers, stoves, or other apparatus (including 
amplifiers) that produce heat.

9

Do not defeat the safety purpose of the polarized or 
grounding-type plug. A polarized plug has two blades 
with one wider than the other. A grounding type plug has 
two blades and a third grounding prong. The wide blade 
or the third prong are provided for your safety. If the 
provided plug does not fit into your outlet, consult an 
electrician for replacement of the obsolete outlet.

10 Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 
point where they exit from the apparatus.

11 Only use attachments/accessories specified by the 

manufacturer.

12 Use only with the cart, stand, tripod, 

bracket, or table specified by the 
manufacturer, or sold with the 
apparatus. When a cart is used, use 
caution when moving the cart/
apparatus combination to avoid injury 
from tip-over.

13 Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14 Refer all servicing to qualified service personnel. 

Servicing is required when the apparatus has been 
damaged in any way, such as power-supply cord or plug 
is damaged, liquid has been spilled or objects have fallen 
into the apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been 
dropped.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

RISK OF 

ELECTRIC 

SHOCK DO NOT 

OPEN

CAUTION: TO REDUCE THE RISK OF 

ELECTRIC SHOCK, DO NOT REMOVE 

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER 

SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

• Explanation of Graphical Symbols

The lightning flash with arrowhead 
symbol, within an equilateral triangle, is 
intended to alert you to the presence of 
uninsulated “dangerous voltage” within 
the product’s enclosure that may be of 
sufficient magnitude to constitute a risk 
of electric shock to persons.

The exclamation point within an 
equilateral triangle is intended to alert 
you to the presence of important 
operating and maintenance (servicing) 
instructions in the literature 
accompanying the appliance.

IMPORTANT

Please record the serial number of this unit in the space 
below.
MODEL: 
Serial No.: 
The serial number is located on the rear of the unit. 
Retain this Owner’s Manual in a safe place for future 
reference.

FOR CANADIAN CUSTOMERS

To prevent electric shock, match wide blade of plug to 
wide slot and fully insert.
This Class B digital apparatus complies with Canadian 
ICES-003.

Summary of Contents for YAS-101BL





















Reviews: