8-29
EVU00790
Spark arrester cleaning
Be sure the exhaust pipe and muffler are cool
before cleaning the spark arrester.
1. Remove the bolts.
2. Remove the tailpipe by pulling it out of
the muffler.
3. Tap the tailpipe lightly, and then use a
wire brush to remove any carbon depos-
its from the spark arrester portion of the
tailpipe.
4. Insert the tailpipe into the muffler and
align the bolt holes.
5. Install the tailpipe by installing the bolts,
and then tighten the bolts to the specified
torque.
1. Bolt (
×
3)
1. Tailpipe
2. Spark arrester
Tightening torque:
Tailpipe bolt:
9.5 N·m (0.95 m·kgf, 6.9 ft·lbf)
EE.book Page 29 Tuesday, July 27, 2004 5:17 PM
Summary of Contents for Yamaha Rhino 660
Page 1: ......
Page 2: ......
Page 154: ...EE book Page 2 Tuesday July 27 2004 5 17 PM ...
Page 155: ......