manualshive.com logo in svg

Yamaha XZ10YMXH, Owner'S Manual

Share
Download
Yamaha XZ10YMXH Owner'S Manual Download Page 64

4-26

4

When storing any documents in the glove
compartment, be sure to wrap them in a plas-
tic bag so that they will not get wet. When
washing the vehicle, be careful not to let any
water enter the glove compartment.

NOTICE

ECB02071

To protect from damage, do not put metal
items, like tools, or sharply edged items di-
rectly in the glove compartment. If they
must be stored, wrap them in appropriate
cushioning material.

 

EBU35010

Storage compartments

There are storage compartments located in
the center console, under the passenger seat,
and behind the driver seat.
To access the storage compartment under
the passenger seat, remove the seat cushion
(see page 4-22 for more information).

1. Unlock.
2. Open.

1

2

U2HC7ME0.book  Page 26  Monday, June 20, 2016  5:34 PM

Summary of Contents for XZ10YMXH























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands