Yamaha XVS950CU Owner'S Manual Download Page 71

Page: 71 / 86

PERIODIC MAINTENANCE AND ADJUSTMENT

6-30

3. Insert a new bulb into the socket,

push it in, and then turn it clock-
wise until it stops.

4. Install the lens by installing the

screws.

NOTICE:

Do not over-

tighten the screws, otherwise
the lens may break.

[ECA10681]

EAU24330

License plate light

If the license plate light does not come
on, have a Yamaha dealer check the
electrical circuit or replace the bulb.

EAU45225

Replacing the auxiliary light
bulb

If the auxiliary light bulb burns out, re-
place it as follows.

1. Remove the headlight unit. (See

page 6-28.)

2. Remove the auxiliary light bulb

socket (together with the bulb) by
pulling it out.

3. Remove the burnt-out bulb by pull-

ing it out.

1. Turn signal light bulb

1. Auxiliary light bulb socket

U2DXE0E0.book Page 30 Monday, June 24, 2013 9:30 AM

Summary of Contents for XVS950CU























































































Search results

Summary of Contents for XVS950CU

Reviews:

Related manuals for XVS950CU

Brands by name

Popular brands

Yamaha XVS950CU, Owner'S Manual

Search results

Summary of Contents for XVS950CU

Reviews:

Related manuals for XVS950CU

Brands by name

Popular brands